Dental Curing Lamp With 1 Second Cure Time Dual light intensity mode 2600mAh xxx

Description: Technical parameter Model: MaxCure 9 Power input: 100-240VAC 50Hz/60Hz 0.4A Power output: DC 5V/1A Wavelength: 380nm ~ 515nm Light intensity: 100mW/cm² ~ 2500mW/cm² Battery: 2600mAh MaxCure9 One-second curing powerful spotlight The energy is more concentrated and the curing efficiency is higher 01 Dual light intensity mode P1 P1 High light intensity: 2300-2500mW/cm2 Curing time: 1s.3s Used for curing orthodontic brackets, post and core and porcelain veneer photosensitive adhesives P2 standard light intensity: 1000-1200mW/cm2 Curing time: 5S, 10s, 15S, 20S Used for conventional curing resins 02 Broad-spectrum Curing most materials Most of the resins on the market use CQ as the photoinitiator, but some resins use two new types of photoinitiators, diphenylphosphorus oxide or lvocerin, and the new materials containing TPO have a light absorption peak of 405nm. If you use an ordinary narrow-spectrum light curing machine (wavelength range: 420nm-480nm), the resin is prone to incomplete curing. And we know that incomplete composite curing often leads to secondary pulpitis, apical inflammation, and tooth hypersensitivity. Broad-spectrum Curing most materials MaxCure 9 broad-spectrum light curing, newly added the 385- 420nm band, the wavelength range is 385nm-515nm. It can better cure resin materials containing TPO and other emerging photoinitiators, and is suitable for ideal curing of all resin materials on the market Higher curing efficiency STRONG FOCUS After a full upgrade, MaxCure 9 changes from a single blue light to a blue-violet light, which can truly cure all light-curing materials 03 Large battery capacity lithium battery- International CB certification MaxCure9 Battery capacity is 85% higher than normal Curing Lights 04 Al Intelligence system Advanced technology Constant current drive technology Constant light intensity output, stable voltage and constant power, does not decay with the decrease of electricity Lamp head automatic detection 1. When the device is not equipped with the lamp holder or the lamp holder assembly has a problem (not installed, the lamp line is broken, etc.), the screen shows the word' Er and continues to blink for 10S and automatically shuts down. 2, the lamp holder will be installed during the error alarm, the error alarm will disappear, "1 installed the lamp holder moment, the lamp will be lit instantaneously. Main engine overheat protection When the continuous use of the machine time reaches 200s, the host automatically enters the overheat protection mode. At this time, the screen will appear"EH"and blink, and there is no reaction when using the key. Need to wait for 200s, lamp head heat reduction, automatic exit overheating protection program,Normal operation is restored. Battery performance test The host automatically detects the battery performance. If the battery cannot be output at constant power after full charge,The word "Er" will appear on the screen and blink. Battery performance test The host automatically detects the battery performance. Power supply overvoltage protection With its own safe power supply adaptation test, the host cannot be charged when charging with a non-standard overvoltage adapter.

Price: 133.31 USD

Location: gx

End Time: 2024-12-24T08:21:56.000Z

Shipping Cost: 0 USD