Dexter Russell Traditional Green River Knife Blades, Set of 4

Description: Dexter Russell Traditional Green River Carbon Steel Knife BladesQuantity: 4Condition: New (there's some rust spots on the exposed, unpolished tangs which is common for these blades - nothing egregious)Steel: CarbonGrind: Full height flatMade in USA THESE ARE CARBON STEEL KNIVES THAT WILL RUST IF NOT PROPERLY WASHED & DRIED AFTER EACH USE!!NO DISHWASHER!! THESE ARE NOT SHOWPIECES, THEY ARE INEXPENSIVE MEAT PROCESSING KNIVES. THE FIT & FINISH IS COMMENSURATE WITH THE PRICE. SOME BLADES ARE POLISHED BETTER THAN OTHERS. THE EXPOSED TANGS HAVE SOME RUST SPOTS AND DISPLAY THE RAINBOW COLORING FROM THE HEAT TREATMENT. These make great project knives. Due to the low cost you can experiment with re-grinds, re-profiling, and handle styles. Calculated shipping rule on all of my knife/blade listings. From top to bottom as seen in first photo: 5-inch BoningPartial tangOverall length: 9.750 inchesEdge length: 5 inchesThickness of spine: at heel = 0.093 inches, at midpoint = 0.080 inches, at tip = 0.027 inches 6-inch ButcherFull tangOverall length: 10.625 inchesEdge length: 6 inchesThickness of spine: at heel = 0.093 inches, at midpoint = 0.089 inches, at tip = 0.027 inches 7-inch BoningPartial tangOverall length: 9.250 inchesEdge length: 7 inchesThickness of spine: at heel = 0.093 inches, at midpoint = 0.077 inches, at tip = 0.027 inches Hunting/FishingFull tangOverall length: 9 inchesEdge length: 4.750 inchesThickness of spine: at heel = 0.085 inches, at midpoint = 0.085 inches, at tip = 0.027 inches

Price: 39.95 USD

Location: Fremont, Nebraska

End Time: 2024-11-16T06:35:28.000Z

Shipping Cost: N/A USD