F56A-1 Manual Backwash Filter Control Valve Water Treatment Top Strainer BSP/NPT

Description: Save a lot when you combine shipping! Add more items to your cart, shipping automatically spread between your items. !!! A T T E N T I O N !!! There are 4 variations in this listing: 1. F56A1 Control Valve - equipped with BSPP (male)-1" x FIP-1" thread adapters for North American Market (USA and Canada). Top Distributor (aka Screen aka Strainer) and Silicone Grease included. 2. F56A1 Control Valve - equipped with BSPP (male)-1" x FIP-1" thread adapters for North American Market (USA and Canada). Silicone Grease included. 3. F56A1 Control Valve /has 3 BSPP (G) ports 1"/ - NOT for North American Market. Top Distributor (aka Screen aka Strainer) and Silicone Grease included. 4. Just 3 pcs. NORYL Plastic male BSPP (G) - female NPT (FPT) transition adapters 1 inch. NPT threads differ from BSP threads in the tooth angle, which is 60 degrees instead of 55, and the edges are more pronounced. Another difference is in the pitch: NPT threads have 11.5 threads per inch while BSP threads have 11 threads per inch. Other names:Manual Whole house water filtration ValveMANUAL WATER FILTER VALVE RINSE/BACKWASH/FILTER SETTINGF56A Manual Multi-port Filter Control ValveThe USAQUAPRO F56A-1” Manual multi port Filter Control Valve features a flow rate of 17.6 GPM (4m³/h) and utilizes a ceramic sealing technology with corrosion resistant gasket for opening and closing functions. It can be used with tank sizes up to 1354, with heavy media like sand, and up to 1665 with GAC and/or Filter-AG. This valve is for use in water filters (carbon, sediment, multimedia, sand, or any other backwash media), for residential or commercial application.Media tank is usually a FRP tank, holding the media, and this valve will do backwash and rinse service for the media.Single tank control valve, no water pass when the valve is in washing. Has a Mounting base 2.5"-8NPSM, and Inlet/Outlet/Drain ports G1" Female threads or FIP1" threads with adapters if included.Control Valve has Service, Fast rinse, and Backwash modes, with manual operation. With a handle, you can switch the settings easily without turning off the pump or the power. When selecting a valve setting, make sure the handle arrow points to the desired mode directly (not in between two modes). NO electricity required. If you have started backwashing your filter, always make sure you backwashed enough to get turbidity leave the tank. Usually it takes 6-10 minutes to backwash. Use additional flow restriction valve or a washer on the drain line to limit drain flow for NOT to wash out the tank media. As the name suggests, the Manual filter Control Valve is operated by manually spinning the handle or hand wheel. Its handle can be turned 180 degrees and could be available in both plastic and metal. For tanks that range in size from 8" to 13", the installation technique is top-mounted. The primary applications for the Manual Filter Control Valve include carbon and sand filtration systems in homes, as well as swimming pool filtration, iron and manganese removal filtration, and pre-filtration systems for reverse osmosis treatment. Included with this purchase:Control Valve -1 PcBase Seal Ring (72 x 5.3) - 1 PcWasher 1" (30x23x3.5)mm -3 Pcs Top Strainer - 1 Pc (variative)NPT Adapter - 3 Pcs (variative)User Manual - 1 PcModelF56A1（51104）Handle materialMetalMount typeTop mountInlet/outletG1" F or NPT1" with adapters if included DrainG1" F or NPT1" with adapters if included Mounting base2.5"-8NPSMRiser pipe1.05"ODFlow rate4m³/hFilter tank6"--12"Water pressure0.15-0.6MpaWater temperature5-50℃Water turbidity＜20FTUApplicationActivated carbon filter, sand filterFilter mediaQuartz sand, activated carbon Top & Bottom Strainers you might be interested in:Top StrainerBottom Strainer

Price: 13.19 USD

Location: Palm Coast, Florida

End Time: 2024-08-09T06:39:02.000Z

Shipping Cost: 2 USD