Maven 600ml 1:1 Ratio (20.3oz) Empty 2-Part C-System Cartridges with included Pi

Description: Maven 600ml 1:1 Ratio (20.3oz) Empty 2-Part C-System Cartridges with included Pistons & Sealing Caps Maven 600ml 1:1 Ratio (13.2oz) 2-Part (dual-component) 1:1 ratio 400ml C-System empty Adhesive Cartridge, with included Resealable Cap and Sealing Pistons. Compatible as a back-up or substitute for Sulzer MedMix Part Numbers: AJ 600-01-10-01-US (301514) Nordson EFD Cartridge Part Number: Cartridges: 7702971 (C601SS-01) PushPin Pistons: 7702765 Available in 2 kit packages, plus Accessories: Empty Cartridges and Pistons Starter Kit with dispenser Useful Accessories About the Cartridges: These cartridges include matching pistons and a re-sealable tip (or cap). They are ready for filling with material, storing and dispensing. These 2-Part cartridges are industrial grade and silicone free. The cartridge design/fit using the "C-System", and are manufactured by Sulzer MixPac, the industry leader in 2-part fluid packaging and dispensing. These 2-Part Cartridges are industrial grade, silicone free, and rated up to 100psi sustained pressure. The Cartridge design/fit using the industrial standard "C-System" template. The 2-Part design keeps the two adhesive parts separate, until a separate mixing Nozzle is attached, where the two parts are pushed or extruded into the mixing Nozzle and bonding or curing begins. The 2-Part design keeps the two adhesive parts separate, until a separate mixing nozzle is attached, where the two parts are pushed or extruded into the mixing nozzle and bonding or curing begins. Each kit includes different cartridge-count options… either 5, 10, 25, 50, or 100 cartridges with the necessary cap and sealing pistons to close and seal the empty cartridges. These cartridges are perfect for storing and applying bulk adhesives that use a 2:1 mix ratio, where precise metering and mixing is needed. About the Starter Kits: Each Starter Kit includes either 5, 10, 25, 50, or 100 cartridges, related sealing pistons and cartridge caps, mixing nozzles (one nozzle for each cartridge in your kit), and either one Dripless DC400 dispenser. We recommend checking out our Starter Kits to get set up and running. Or if you prefer getting the dispenser separately, check out the Dripless DC400 Dispensers, which will enable you to dispense the adhesives out of these cartridge kits. Total Cartridge Length (bottom to cap tip 10 3/16 inches Barrel length 8 1/2 inches Total cartridge width (across both barrels) 3 7/8 inches Barrel Inner Diameter (1:1 ratio so both sides are same) 1.77 inches Mixer Style Bell Style or Integrated-Nut Style, and either Helix or Quadro/Square Total Cartridge Volume (both barrels combined) 1:1 ratio 600ml total volume (300ml x 300ml) , or 20.3oz total volume (10.15oz x 10.15oz) NOTE: Additional accessories needed. Consider the pre-configured starter kits, or view the accessories scroll-bar below to ensure you get what you need. For example, with these empty cartridges you will also need mixing nozzles and a dispensing product to push/extrude/dispense the adhesive out. We recommend also getting one of our 400ml Dispensers, which will enable you to dispense the adhesives out of these cartridge kits. The mixing nozzles needed are of the "Bell" or “Integrated Nut” design, which easily twist on and off the cartridge end. These nozzles tend to be difficult to clean and store after their first use, and therefore generally considered to be single-use accessories. These Cartridges use standard static mixer nozzles. Cartridges immediately available in mix ratio's 1:1 or 2:1. Mix ratios of 4:1 and 10:1 can be ordered but on a special-order basis due to infrequent market demand. Products are industrial grade safe to 100 psi and are certified silicone free. Dispensers are available for all size cartridges either in manual of pneumatic. The “C” System is comprised of a small lightweight, hand-held manual dispenser which dispenses 2-component adhesives through “C” System cartridges and mixers. Cartridge systems are available in a variety of volumetric ratios. Please be sure to select the correct ratio for your two component system. Maven 600ml 1:1 Ratio (20.3oz) Empty 2-Part C-System Cartridges with included Pistons & Sealing Caps Maven 600ml 1:1 Ratio (13.2oz) 2-Part (dual-component) 1:1 ratio 400ml C-System empty Adhesive Cartridge, with included Resealable Cap and Sealing Pistons. Compatible as a back-up or substitute for Sulzer MedMix Part Numbers: AJ 600-01-10-01-US (301514) Nordson EFD Cartridge Part Number: Cartridges: 7702971 (C601SS-01) PushPin Pistons: 7702765 Available in 2 kit packages, plus Accessories: Empty Cartridges and Pistons Starter Kit with dispenser Useful Accessories About the Cartridges: These cartridges include matching pistons and a re-sealable tip (or cap). They are ready for filling with material, storing and dispensing. These 2-Part cartridges are industrial grade and silicone free. The cartridge design/fit using the "C-System", and are manufactured by Sulzer MixPac, the industry leader in 2-part fluid packaging and dispensing. These 2-Part Cartridges are industrial grade, silicone free, and rated up to 100psi sustained pressure. The Cartridge design/fit using the industrial standard "C-System" template. The 2-Part design keeps the two adhesive parts separate, until a separate mixing Nozzle is attached, where the two parts are pushed or extruded into the mixing Nozzle and bonding or curing begins. The 2-Part design keeps the two adhesive parts separate, until a separate mixing nozzle is attached, where the two parts are pushed or extruded into the mixing nozzle and bonding or curing begins. Each kit includes different cartridge-count options… either 5, 10, 25, 50, or 100 cartridges with the necessary cap and sealing pistons to close and seal the empty cartridges. These cartridges are perfect for storing and applying bulk adhesives that use a 2:1 mix ratio, where precise metering and mixing is needed. About the Starter Kits: Each Starter Kit includes either 5, 10, 25, 50, or 100 cartridges, related sealing pistons and cartridge caps, mixing nozzles (one nozzle for each cartridge in your kit), and either one Dripless DC400 dispenser. We recommend checking out our Starter Kits to get set up and running. Or if you prefer getting the dispenser separately, check out the Dripless DC400 Dispensers, which will enable you to dispense the adhesives out of these cartridge kits. Total Cartridge Length (bottom to cap tip 10 3/16 inches Barrel length 8 1/2 inches Total cartridge width (across both barrels) 3 7/8 inches Barrel Inner Diameter (1:1 ratio so both sides are same) 1.77 inches Mixer Style Bell Style or Integrated-Nut Style, and either Helix or Quadro/Square Total Cartridge Volume (both barrels combined) 1:1 ratio 600ml total volume (300ml x 300ml) , or 20.3oz total volume (10.15oz x 10.15oz) NOTE: Additional accessories needed. Consider the pre-configured starter kits, or view the accessories scroll-bar below to ensure you get what you need. For example, with these empty cartridges you will also need mixing nozzles and a dispensing product to push/extrude/dispense the adhesive out. We recommend also getting one of our 400ml Dispensers, which will enable you to dispense the adhesives out of these cartridge kits. The mixing nozzles needed are of the "Bell" or “Integrated Nut” design, which easily twist on and off the cartridge end. These nozzles tend to be difficult to clean and store after their first use, and therefore generally considered to be single-use accessories. These Cartridges use standard static mixer nozzles. Cartridges immediately available in mix ratio's 1:1 or 2:1. Mix ratios of 4:1 and 10:1 can be ordered but on a special-order basis due to infrequent market demand. Products are industrial grade safe to 100 psi and are certified silicone free. Dispensers are available for all size cartridges either in manual of pneumatic. The “C” System is comprised of a small lightweight, hand-held manual dispenser which dispenses 2-component adhesives through “C” System cartridges and mixers. Cartridge systems are available in a variety of volumetric ratios. Please be sure to select the correct ratio for your two component system. × × × × × × × × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Paying via Direct Deposit Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase. Additional Information No additional information at this time Ask seller a question You might also like MixPac MAQ 05-16L Quadro Square 3.25-inch 16-element High-Efficiency Mixing Nozz Jensen Steel Straight 14-Gauge Dispensing Tips Olive (Push-On & Luer-Lock) - 1/2 Maven Replacement Parts - Female Cross-Fitting High-Pressure Brass Pipe Fitting: Leister Turbo Nozzle (ø 62mm), air outlet 110.582 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Perigee Direct Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 7.95 USD

Location: North Richland Hills, Texas

End Time: 2024-09-29T03:56:07.000Z

Shipping Cost: N/A USD