Micro sampler 0.5ul (pointed) microliter sampler gas phase liquid phase

Description: Micro sampler 0.5uL1uL5uL10uL25uL50uL Shanghai Anting microliter sampler gas phase liquid phase Oproduct name Anting Microsampler product features The scale is clear, the tube body is uniform, and the transparency is high Product details) Air-tight (pointed) microinjector, for high-performance liquid or gas analysis, the injection is divided into liquid phase (flat tip) and gas phase (pointed tip) 1. When using the air-tight microsampler, please push the metal sleeve of the needle tip part back by hand. At this time, the needle tip in the metal sleeve is connected to the glass tube for sample injection or sample extraction. (Note that the metal sleeve of the needle tip cannot be released when injecting or discharging the sample). 2. After sampling, the metal sleeve is released, the needle tip is disconnected from the glass tube, and the sample is sealed in the glass tube. 3. When the sample is taken out, push the metal sleeve backward to connect the needle tip with the glass tube before taking out the sample. 4. Please clean it in time after each use to prevent the needle tip from being blocked or the glass tube and the push rod stuck. 5. If there is air leakage behind the push rod, please properly tighten the sealing screw behind the glass tube. With or without liquid Generally, it can be divided into two types: no liquid storage and liquid storage. [1] 0.5UL/1UL/5UL for very small liquid injection. It is a reservoirless microinjector: the stainless steel core of the injector leads directly to the needle tip, and there is no reservoir. [2] 10UL and above with stock micro-injector: The stainless steel needle tip tube is an empty tube, and the plunger of the injector cannot reach, so there will be air or liquid in the tube Packing: 1PC Warranty period: 120 days

Price: 35 USD

Location: shenzhen

End Time: 2024-12-16T21:56:03.000Z

Shipping Cost: 0 USD