DR-1000 Paintless Dent Repair Tool PDR Induction Heater Car Dent Remover Hotbox

Description: Operation panel introduction：1：Display: display power and time;2：Power/time adjustment knob:when the adjustment knob marking line is located in the “TIME” area, the power default is maximum, and the output time can be adjusted to: MAX, 0.5S, 1.0S, 1.5S, 2.0S, 2.5S, 3.0S, 4.0S; When the adjustment knob marking line is located in the “POWER” area, the output time is the default maximum. At this time, the output power can be adjusted to: 20%, 40%, 60%, 80%, 100%; OFF is off;3：Repairing head connection socket;4：Cooling fan；5：Power socket and switch； Operation introduction： Before using this device, you must read the instructions. If the instructions are not followed carefully, the operator could suffer injury, the device could be damaged, or the car being treated might be damaged. 1. Before-use warning (MUST READ): • Not suitable for operation by those with pacemakers or artificial limbs with metal parts. • Before using this device, you must wear a safety mask, safety gloves, and safety clothing to avoid being burned during use. • Operators must not have any metal objects on their person during operation, including but not limited to watches, cuff links, keys, belt buckles, coins, or zippers. • This device cannot be operated in areas with conductive particulate matter, areas used for applying paint, areas housing or handling chemical fuels, areas of high temperature, and areas of high humidity. • Once the device is powered on, flammable objects must be kept away from the device. • Before you power on the device, make sure that you have a fire extinguisher on hand in case any misoperation causes a fire. • Do not use this device in the vicinity of safety airbags. • Once the device is powered, there must be personnel on site to watch over the device. When the device is not in use, unplug the device's power cable. • This device should be stored at temperatures between 0 and 50 celsius. When transporting the device, avoid vibrations or shocks. 2. Important warnings for use (MUST READ)： • While the Repairing head is restoring a damaged car body, the temperatures of both the Repairing head and the body will rapidly increase. Do not touch either the Repairing head or the car body before they have had time to cool down. • While the Repairing head is in the process of Repairing, the temperatures of both the Repairing head and the damaged area will rapidly increase. Using the Repairing head on one area for too long may increase temperatures to the point of damaging the car's paint job (it is recommended that every 1-1.5 seconds, the operator wipes down the damaged area with a wet rag in order to keep the temperature manageable). • During the Repairing process, the temperatures of both the Repairing head and the damaged area will rapidly increase and the body of the car will immediately become softer. During Repairing, make sure the Repairing head is not applying pressure to the car, otherwise the Repairing process itself might further dent the car. • Connect the "Extension Cable" to the device's Quick Connect head and the Repairing Head's Quick Connection head, and the device is ready to use. • The " Power" intensity can be set between 20% and 100%, “Time” can be set between 0.5s and MAX.Press the "Work" button to activate the device. Let go of it and the device will stop. • After work is complete, set the "Time/Power" to "OFF", and after 5-10 minutes, set the "ON/ OFF Switch" to "OFF" as well. Give the device time to cool down, and then remove the "Power Cable". Every time you use the device, repeat the steps above for a safe and effective experience. 3. Suitable range of use This device is designed specifically to be used with dents on flexible steel car bodies. The diagrams below illustrate the types of dents that can be removed. Dents like the kind caused by impact from hailstones, which leave smooth, rounded dents, can be removed. (More active materials may call for different devices, like pull hooks or suction cups. Consult with training personnel for specifics) 4. Unsuitable range of use • Sharp dents • Body areas that have been damaged and reconstructed • Crumpled/creased areas or dents along creased metal • Aluminum bodies Using the device 1.Connect the "Power Cable" to the device's "Power Input Socket", and plug the other end of the cable into a power socket.( Warning: Must be Check the voltage label on the Repairing head and fuselage before power-on to confirm that the input voltage is in accordance with the required voltage of the equipment. If the input voltage is incorrect, it will damage the equipment or cause fire.) Flip the "ON/OFF Switch" to ON, which will turn on a red light. The "Work Status Display" will also turn on. This is the normal status of the device. 2.Once it turns on, the display will then display a loading message for about 10 seconds. This screen will display the work status of the device. The device itself will release an intermittent "beeping" sound. This is the normal status of the device. (Note: If the device continually displays a loading message, power it down, wait 5 minutes, then power it on again. If it still displays a loading message, contact one of our distributors! ) 3. Connect the "Extension Cable" to the device's Quick Connect head and the Repairing Head's Quick Connection head, and the device is ready to use. 4. The "Time/Power" lets you select a run time between 0.5 seconds and 4 seconds,run power between 20%-100%, Press the "Work" button equipment operates according to set parameters。Press the "Work" button to activate the device. Let go of it and the device will stop. 5. After work is complete, set the "Time/Power" to "OFF", and after 5-10 minutes, set the "ON/ OFF Switch" to "OFF" as well. Give the device time to cool down, and then remove the "Power Cable". Every time you use the device, repeat the steps above for a safe and effective experience Dent repair method Car body dent diagram 1. First, according to the size of the dent and the color of the paint, set the work time and power of the Paint Damage-Free Dent Restorer. Typical use would see the "Time/power" set to 0.5-1 second(s) and 100% power. Grip the Repairing head and press the "Work" button, and begin moving around the dented area. First trace around "area 1", moving in to "area 4" as you add heat. Wait for cooldown. Then, begin at "area 2" and move towards "area 4" as you add heat. Wait for cooldown. Then, begin at "area 3" and move towards "area 4" as you add heat. Wait for cooldown. Finally, continually add heat in "area 4", then wait for cooldown. The repair process should be complete. (Some areas might require repeated applications of heat or repetitions of the above processes)； 2. During the repair process, the operator MUST take note not to work in one area for more than 2 second. It is recommended that an operator applies compressed air or a wet rag to work areas to prevent overheating. During the Repairing process, great amounts of heat will be created, causing the metal of the car to soften. Do not apply downwards pressure while restoring, or the dent will just become larger. During the Repairing process, the operator MUST be mindful of the surface temperature of the car. If the heat gets too high, it will ignite the paint on the car's surface, causing greater damage. We suggest the operator first practices on the piston cap of an unused engine or an abandoned car, this way the operator will learn the functions of the device as well as the dangers associated with its use.Proper use of equipment is the responsibility of any service provider! Package include: 1* set Auto dent repair machine 1* LED dent detection Board PaymentDelivery detailsAbout returnContact usFeedbackPayment1.We accept Paypal 2.All major credit cards are accepted through secure payment processor PayPal. 3.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.Delivery details Every item is checked carefully before shipping 1.This item ship out from Fedex (Tracking number and registered mail will be provided, track status) and will arrive about 1-6business days. 2.After we receive payment, we will deliver the goods within 1 working days at the earliest and no more than 2 working days at the latest Note: If sales season, bad weather...may be delayed... Thank you for understanding! ***Buyer will undertake the inport tax and VAT if required（We can provide the buyer with an invoice, and the buyer needs to handle customs clearance issues）About returnReturn is accepted within 30 days after the buyer's receiving the item. (Excluding contrived damagement or misusage).100% money-back Guaranteed! All product will be tested in 100% before delivery.If the item is defected by the processing of postage,Buyer has up to 14 days from date of receipt for exchange of a new one.All shipping charges for returned products are to be paid by the buyer,Please contact us for the return address.Contact usIf any question, please feel free to contact us via "Ask seller a question" ,We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately.FeedbackWe left positive feedback for you after receiving payment. Your feedback is very important for us, positive feedback and 5 Score DSR is highly appreciated. Please let us know before leaving any negative feedback or 1 point, 2 point low DSR or open any disputes on Paypal and Ebay, please give us the opportunity to resolve any problems and we will try our best to satisfy your needs.

Price: 399.99 USD

Location: shenzhen

End Time: 2024-09-02T15:33:17.000Z

Shipping Cost: 0 USD